Toyota Corolla Manuals

Toyota Corolla: Operating the lights and wipers / Turning on the high beam (®P.581) headlights

Toyota Corolla 2019-2026 Owners Manual / Driving / Operating the lights and wipers / Turning on the high beam (®P.581) headlights

Toyota Corolla. Turning on the high beam (®P.581) headlights

1 With the headlights on, push the lever away from you to turn on the high beams.

Pull the lever toward you to the center position to turn the high beams off.

2 Pull the lever toward you and release it to flash the high beams once.

You can flash the high beams with the headlights on or off.

AFS (Adaptive Front-lighting System)

AFS (Adaptive Front-lighting System) secures excellent visibility at intersections and on curves by automatically adjusting the direction of the light axis of the headlights according to vehicle speed and the degree of the tire’s angle as controlled by steering input.

AFS operates at speeds of approximately 6 mph (10 km/h) or higher.

■Customization

Some functions can be customized.

    Operating instructions

    Operating the switch turns on the lights as follows: A - U.S.A. B - Canada 1 The headlights, daytime running lights (®P.186) and all the lights listed below turn on and off automatically...

    Automatic High Beam

    The Automatic High Beam uses a camera sensor located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc...

    Other information:

    Toyota Corolla 2019-2026 Owners Manual: Type D: Function achieved by using DCM and a smartphone


    The functionality of Service Connect is made possible by the use of a DCM and a smartphone. Service Connect Service Connect uses DCM to collect and transmit vehicle data that allows Toyota to provide: Vehicle Health Report (VHR) (Safety Recalls, Service Campaigns, Current Vehicle Alerts, Required Maintenance, and Vehicle Condition Status) Maintenance Notifications Vehicle Alert Notificatio..

    Toyota Corolla 2019-2026 Owners Manual: Turning the high beams on/off manually


    ■ Switching to the low beams Pull the lever to its original position. The Automatic High Beam indicator will turn off. Push the lever away from you to activate the Automatic High Beam system again. ■ Switching to the high beams Press the Automatic High Beam switch. The Automatic High Beam indicator will turn off and the high beam indicator will turn on. Press the switch to activate the Autom..

    Categories

    SRS airbags

    The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.

    SRS airbag system

    ■ Location of the SRS airbags

    Toyota Corolla. SRS airbags

    read more

    Copyright © 2026 www.tocorolla12.com