Continuously variable transmission
The brake hold system keeps the brake applied when the shift lever is in D, B
(vehicles without paddle shift switches), M (vehicles with paddle shift switches)
or N with the system on and the brake pedal has been depressed to stop the vehicle...
Other information:
1 Check that the parking brake is set. (®P.180, 181)
2 Check that the shift lever is in P (continuously variable transmission) or
N (manual transmission).
3 Firmly depress the brake pedal (continuously variable transmission) or clutch
pedal (manual transmission).
and a message will be displayed
on the multi-information display. If it is not displayed, the engine cannot be started.
4 Press the..
1 Press the Automatic High Beam switch.
2 Push the lever away from you with the headlight switch in the
or
position.
The Automatic High Beam indicator will come on when the system is operating.
■Conditions to turn the high beams on/off automatically
When all of the following conditions are met, the high beams will be turned
on automatically (after approximately 1 second):
The vehicle s..