Toyota Corolla: Safety Connect / Safety Connect LED light Indicators
When the engine switch is turned to ON, the red indicator light comes on for
2 seconds then turns off. Afterward, the green indicator light comes on, indicating
that the service is active.
The following indicator light patterns indicate specific system usage conditions:
- Green indicator light on = Active service
- Green indicator light flashing = Safety Connect call in process
- Red indicator light (except at vehicle start-up) = System malfunction
(contact your Toyota dealer)
- No indicator light (off) = Safety Connect service not active
After you have signed the Telematics Subscription Service Agreement and are enrolled,
you can begin receiving services.
A variety of subscription terms are available for purchase...
■ Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system
is designed to automatically call the response center...
Other information:
The Blind Spot Monitor is a system that uses rear side radar sensors installed
on the inner side of the rear bumper on the left and right side to assist the driver
in confirming safety when changing lanes.
WARNING
■Cautions regarding the use of the system
The driver is solely responsible for safe driving...
A child restraint system for a small child or baby must itself be properly restrained
on the seat with the lap portion of the lap/shoulder belt.
■ Installing child restraint system using a seat belt (child restraint lock function
belt)
Install the child restraint system in accordance to the operation manual enclosed
with the child restraint system...