Toyota Corolla Manuals

Toyota Corolla: Continuously variable transmission (vehicles with paddle shift switches) / Shifting the shift lever

Toyota Corolla. Shifting the shift lever

Toyota Corolla. Shifting the shift lever:While the engine switch is in ON and the brake pedal depressed*, shift the shift lever while pushing the shift release button on the shift knob.

Toyota Corolla. Shifting the shift lever:Shift the shift lever while pushing the shift release button on the shift knob.

Toyota Corolla. Shifting the shift lever:Shift the shift lever normally.

When shifting the shift lever between P and D, make sure that the vehicle is completely stopped and the brake pedal is depressed.

*: For the vehicle be able to be shifted from P, the brake pedal must be depressed before the shift release button is pushed. If the shift release button is pushed first, the shift lock will not be released.

■Shift lock system

The shift lock system is a system to prevent accidental operation of the shift lever in starting.

The shift lever can be shifted from P only when the engine switch is in ON and the brake pedal is being depressed.

■If the shift lever cannot be shifted from P

First, check whether the brake pedal is being depressed.

If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately.

The following steps may be used as an emergency measure to ensure that the shift lever can be shifted. Releasing the shift lock:

1 Set the parking brake.

2 Turn the engine switch off.

3 Depress the brake pedal.

4 Ply the cover up with a flathead screwdriver or equivalent tool. To prevent damaging the cover, wrap the tip of the flathead screwdriver with a tape.

Toyota Corolla. Shifting the shift lever

5 Press and hold the shift lock override button and then push the shift release button on the shift knob.

The shift lever can be shifted while the button is pressed.

Toyota Corolla. Shifting the shift lever

WARNING

■To prevent an accident when releasing the shift lock

Before pressing the shift lock override button, make sure to set the parking brake and depress the brake pedal.

If the accelerator pedal is accidentally depressed instead of the brake pedal when the shift lock override button is pressed and the shift lever is shifted out of P, the vehicle may suddenly start, possibly leading to an accident resulting in death or serious injury.

    Shift position purpose and functions

    ■To protect the continuously variable transmission If the continuously variable transmission fluid temperature is high, “Transmission Oil Temp. High Stop in a Safe Place and See Owner’s Manual” will be displayed on the multi-information display and the vehicle will go into transmission protection mode automatically...

    Selecting shift ranges in the D position

    To drive using temporary shift range selection, operate the “-” or “+” paddle shift switch. When the “-” paddle shift switch is operated, the shift range switches to a range that enables engine braking force that is suitable to driving conditions...

    Other information:

    Toyota Corolla 2019-2026 Owners Manual: Cargo and luggage


    Take notice of the following information about storage precautions, cargo capacity and load: Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit — (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or..

    Toyota Corolla 2019-2026 Owners Manual: Approach warning (vehicle- to-vehicle distance control mode)


    When your vehicle is too close to a vehicle ahead, and suffisufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance. ■ Warning..

    Categories

    Gauges and meters (4.2-inch display)

    Meter display

    ■ Locations of gauges and meters

    Toyota Corolla. Gauges and meters (4.2-inch display)

    The units of measure may differ depending on the intended destination of the vehicle.

    A - Tachometer Displays the engine speed in revolutions per minute

    read more

    Copyright © 2026 www.tocorolla12.com