Toyota Corolla: Other interior features / USB charging port
The USB charging port are used to supply 2.1 A of electricity at 5 V to external
devices. The USB charging port are for charging only. They are not designed for
data transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to the manual
included with the device before using a USB charging port.
■ Using the USB charging port
Lift the lid while pulling up the knob.

■The USB charging port can be used when
The engine switch is in ACC or ON.
■Situations in which the USB charging port may not operate correctly
- If a device which consumes more than 2.1 A at 5 V is connected
- If a device designed to communicate with a personal computer, such as a
USB memory device, is connected
- If the connected external device is turned off (depending on device)
- If the temperature inside the vehicle is high, such as after the vehicle
has been parked in the sun
■ About connected external device
Depending on the connected external device, charging may occasionally be suspended
and then start again. This is not a malfunction.
NOTICE
■ To prevent damage to the USB charging port
- Do not insert foreign objects into the port.
- Do not spill water or other liquids into the port.
- Do not apply excessive force to or impact the USB charging port.
- Do not disassemble or modify the USB charging port.
■ To prevent damage to external devices
- Do not leave external devices in the vehicle. The temperature inside
the vehicle may become high, resulting in damage to an external device.
- Do not push down on or apply unnecessary force to an external device
or the cable of an external device while it is connected.
■To prevent battery discharge
Do not use the USB charging port for a long period of time with the engine
stopped.
The power outlet can be used for 12 V accessories that run on less than 10 A.
Lift the lid while pulling up the knob and open the power outlet lid.
■ The power outlet can be used when
The engine switch is in ACC or ON...
Other information:
A - Temperature control switch
B - Fan speed control switch
C - “A/C” switch
D - Outside air mode switch
E - Recirculated air mode switch
F - Eco air conditioning mode switch
G - Airflow mode control switch
H - Rear window defogger and outside rear view mirror defoggers switch
I - Windshield defogger switch
J - Off switch
K - Automatic mode switch
■ Adjusting the temperature setting
To adju..
The RSA system recognizes specific road signs using the front camera to provide
information to the driver via the display.
If the system judges that the vehicle is being driven over the speed limit, performing
prohibited actions, etc. according to the recognized road signs, it notifies the
driver through a visual notification and notification buzzer.
WARNING
■Before using the RSA
Do not rely..