Toyota Corolla Manuals

Toyota Corolla: Garage door opener / Operating HomeLink

Press the appropriate Home- Link® button. The HomeLink® indicator light should turn on.

The status of the opening and closing of a garage door is shown by the indicators.

Toyota Corolla. Operating HomeLink

A - Opening

C - Closing

This function is only available if the garage door opener motor used is a compatible device.

Toyota Corolla. Operating HomeLink

The indicators can operate within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions between the garage door and the vehicle, such as houses and trees, feedback signals from the garage door may not be received.

To recall the previous door operation status, press and release either HomeLink® buttons Toyota Corolla. Operating HomeLink and Toyota Corolla. Operating HomeLink or Toyota Corolla. Operating HomeLink and Toyota Corolla. Operating HomeLink simultaneously. The last recorded status will be displayed for 3 seconds.

    Programming the Home- Link

    ■ Before programming Home- Link During programming, it is possible that garage doors, gates, or other devices may operate. For this reason, make sure that people and objects are clear of the garage door or other devices to prevent injury or other potential harm...

    Erasing the entire Home- Link® memory (all three codes)

    Press and hold the 2 outside buttons for 10 seconds until the HomeLink® indicator light changes from continuously lit (orange) to rapidly flashing (green)...

    Other information:

    Toyota Corolla 2019-2024 Owners Manual: Opening the trunk


    ■ Trunk opener Pull the lever upward to release the trunk lid. ■ Trunk release button (vehicles with a smart key system) While carrying the electronic key, press the button on the trunk lid. When all the doors are unlocked using one of the following methods, the trunk can be opened without the electronic key: Entry function Wireless remote control Door lock switches Automatic door unloc..

    Toyota Corolla 2019-2024 Owners Manual: Using automatic mode


    1 Press the automatic mode switch. 2 Adjust the temperature setting. 3 To stop the operation, press the off switch. If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained. ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the am..

    Categories

    iMT (Intelligent Manual Transmission)

    The iMT optimally controls the engine speed to suit the driver’s operation of the clutch pedal and shift lever, helping the driver to shift gears more smoothly. Additionally, when the clutch pedal is operated, the iMT helps reduce shift shock, allowing for lighter shift operations when driving on a winding road or incline.

    Press the “iMT” switch.

    Toyota Corolla. iMT (Intelligent Manual Transmission)

    read more

    Copyright © 2024 www.tocorolla12.com