Toyota Corolla: Maintenance data (fuel, oil level, etc.) / Cooling system

To determine if your vehicle's engine coolant reservoir is type A or type B,
refer to "Checking the engine coolant".
■ Oil capacity (Drain and refill [Reference*])
The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick...
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap...
Other information:
■ Checking fluid level
The brake fluid level should be between the “MAX” and “MIN” lines on the tank.
■ Adding fluid
1 Slide and lift up the rubber strip to partly remove it as shown.
2 Disconnect the claws and remove the service cover.
3 Remove the reservoir cap.
4 Add brake fluid slowly while checking the fluid level.
Make sure to check the fluid type and prepare the necessary it..
Some function settings are changed simultaneously with other functions being
customized. Contact your Toyota dealer for further details.
A - Settings that can be changed using the audio system screen
B - Settings that can be changed using the meter control switches
C - Settings that can be changed by your Toyota dealer
Definition of symbols: O = Available, — = Not available
■ Gauges, meters a..