Toyota Corolla Manuals

Toyota Corolla: Phone operation (Hands-free system for cellular phones) / Registering/Connecting a Bluetooth® phone

To use the hands-free system for cellular phones, it is necessary to register a cellular phone with the system.

■ Connecting a Bluetooth® device

► Registering an additional device

1 Display the phone top screen.

2 Select “Select Device”.

3 Select “Add Device”.

When another Bluetooth® device is connected, a confirmation screen will be displayed. To disconnect the Bluetooth® device, select “Yes”.

4 Follow the steps in “Registering a Bluetooth® phone for the first time” from step 5.

► Selecting a registered device

1 Display the phone top screen.

2 Select “Select Device”.

3 Select the desired device to be connected.

4 Check that a confirmation screen is displayed when the connection is complete.

If an error message is displayed, follow the guidance on the screen to try again.

■ Bluetooth® phone condition display

The condition of the Bluetooth® phone appears on the upper right side of the screen.

    Some basics

    The hands-free system enables calls to be made and received without having to take your hands off the steering wheel. This system supports Bluetooth ®...

    Using the phone switch/microphone

    ■ Steering switch By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. A - Phone switch If the switch is pressed during a call, the call will end...

    Other information:

    Toyota Corolla 2019-2023 Owners Manual: Indication on the multi-information display


    When the front camera recognizes a sign, the sign will be displayed on the multi-information display. When the driving support system information is selected, a maximum of 3 signs can be displayed. When a tab other than the driving support system information is selected, the following types of road signs will be displayed...

    Toyota Corolla 2019-2023 Owners Manual: RCTA (Rear Cross Traffic Alert) function


    The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up. System components A - Meter control switches Turning the RCTA function on/off...

    Categories

    Unlocking and locking the doors from the outside

    ■ Smart key system (if equipped)

    Carry the electronic key to enable this function.

    Toyota Corolla. Unlocking and locking the doors from the outside

    1 Grip the driver’s door handle to unlock the door. Holding the driver’s door handle for approximately 2 seconds unlocks all the doors. Grip the front passenger’s door handle to unlock all the doors.*

    read more

    Copyright © 2023 www.tocorolla12.com