Toyota Corolla Manuals

Toyota Corolla: Connectivity settings / Wi-Fi® Hotspot

By connecting a device to the vehicle via Wi-Fi®, it can access the internet through the DCM.

  • To use this function, a Wi-Fi® Hotspot service subscription from Verizon Wireless is required. Contact your Toyota dealer for details.
  • This function is not made available in some countries or areas.

Connecting a device to the in-vehicle access point

Searching for and connecting a device to the vehicle access point

1 Enable the Wi-Fi® Hotspot function.

2 Disable the “Hide Access Point” function.

3 Search for the vehicle access point using the device you wish to connect.

For details about operating the device, refer to the documentation which came with it.

4 Operate the device to connect it to the vehicle access point.

To check the vehicle access point password, check “Password”.

Hints for connecting to the vehicle via Wi-Fi® can be displayed.

Connecting a device to the in-vehicle access point using the access point name (SSID)

1 Enable the Wi-Fi® Hotspot function.

2 Enable the “Hide Access Point” function.

3 Enter the access point name (SSID) into the device you wish to connect and connect it.

  • To check the vehicle access point password, check “Password”.
  • The security settings on the device must be the same as that displayed for “Security”.
  • For details about operating the device, refer to the documentation which came with it.

Editing the Bluetooth® device information

The Bluetooth® device’s information can be displayed on the screen. The displayed information can be edited. This operation cannot be performed while driving...

Changing the Wi-Fi® settings

1 Press the “MENU” button. 2 Select “Setup”. 3 Select “Wi-Fi*”. *: Wi-Fi® is a registered trademark of Wi-Fi Alliance®. 4 Select the desired item to be set...

Other information:

Toyota Corolla 2019-2023 Owners Manual: Turning the high beams on/off manually


■ Switching to the low beams Pull the lever to its original position. The Automatic High Beam indicator will turn off. Push the lever away from you to activate the Automatic High Beam system again. ■ Switching to the high beams Press the Automatic High Beam switch...

Toyota Corolla 2019-2023 Owners Manual: Installing the spare tire


1 Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off. 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount...

Categories

iMT (Intelligent Manual Transmission)

The iMT optimally controls the engine speed to suit the driver’s operation of the clutch pedal and shift lever, helping the driver to shift gears more smoothly. Additionally, when the clutch pedal is operated, the iMT helps reduce shift shock, allowing for lighter shift operations when driving on a winding road or incline.

Press the “iMT” switch.

Toyota Corolla. iMT (Intelligent Manual Transmission)

read more

Copyright © 2023 www.tocorolla12.com