Toyota Corolla Manuals

Toyota Corolla: Driving procedures / Engine (ignition) switch (vehicles with a smart key system)

Toyota Corolla 2019-2024 Owners Manual / Driving / Driving procedures / Engine (ignition) switch (vehicles with a smart key system)

Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch modes.

Changing the engine switch positions

1 OFF (“LOCK” position) The steering wheel is locked and the key can be removed. (vehicles with a continuously variable transmission: The key can be removed only when the shift lever is in P...

Starting the engine

1 Check that the parking brake is set. (®P.180, 181) 2 Check that the shift lever is in P (continuously variable transmission) or N (manual transmission)...

Other information:

Toyota Corolla 2019-2024 Owners Manual: Installing the spare tire


1 Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off. 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount...

Toyota Corolla 2019-2024 Owners Manual: Gauges and meters (7-inch display)


Meter display ■ Locations of gauges and meters ► Analog speedometer The units of measure may differ depending on the intended destination of the vehicle. A - Tachometer<> Displays the engine speed in revolutions per minute B - Speedometer C - Sub speedometer D - Clock (®P...

Categories

General settings

Settings are available for clock, operation sounds, etc.

Displaying the general settings screen

1 Press the “MENU” button.

Toyota Corolla. General settings

2 Select “Setup”.

If the general settings screen is not displayed, select “General”.

3 Select the desired items to be set.

Toyota Corolla. General settings

read more

Copyright © 2024 www.tocorolla12.com