Toyota Corolla: Do-it-yourself maintenance / Positioning a floor jack
When using a floor jack, follow the instructions in the manual provided with
the jack and perform the operation safely. When raising your vehicle with a floor
jack, position the jack correctly. Improper placement may damage your vehicle or
cause injury.
Location of the jack point
■ Front

■ Rear

Opening the hood
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Pull the auxiliary catch lever to the left and lift the hood.
3 Hold the hood open by inserting the support rod into the slot...
Other information:
The Blind Spot Monitor is a system that uses rear side radar sensors installed
on the inner side of the rear bumper on the left and right side to assist the driver
in confirming safety when changing lanes.
WARNING
■Cautions regarding the use of the system
The driver is solely responsible for safe driving. Always drive safely, taking
care to observe your surroundings.
The Blind Spot Monitor is..
Check if the treadwear indicators are showing on the tires. Also check the tires
for uneven wear, such as excessive wear on one side of the tread.
Check the spare tire condition and pressure if not rotated.
A - New tread
B - Worn tread
C - Treadwear indicator
The location of treadwear indicators is shown by a “TWI” or “”
mark, etc., molded into the sidewall of each tire.
Replace the tir..