Toyota Corolla: Tires / Selecting wheel set
Your vehicle is equipped with tire pressure warning system with the function
to have ID codes registered for a second wheel set, for example a winter set, by
Toyota dealer.
After registration of a second wheel set, either of these two wheel sets can
be selected for usage with the tire pressure warning system.
■ Operating conditions for the function
- This function will perform the change of wheel set only if a second wheel
set has been registered. If no second wheel set has been registered, no change
will be made when selecting this function in the menu.
- Only a change between both registered wheel set is possible, mixing between
these wheel sets is not supported.
■ How to change between wheel sets
1 Have the vehicle fitted with the preferred wheel set.
2 Press
or
of the meter control switch to select
.
3 Press
or
to select “Vehicle Settings” and then
press .
4 Press
or
to select “TPWS” and then press .
5 Press
or
to select “Change Wheel”. Then press
and hold until the tire pressure warning light blinks slowly 3 times.
![Toyota Corolla. Selecting wheel set](images/selecting_wheel_set-2466/2140/toyota_corolla__selecting_wheel_set_831.png)
6 Initialize the tire pressure warning system.
■ The tire pressure warning system must be initialized in the following circumstances:
When rotating front and rear tires which have different tire inflation pressures...
Checking the specified tire inflation pressure
The recommended cold tire inflation pressure and tire size are displayed on the
tire and loading information label...
Other information:
The Mobile Assistant function is a voice input assist function. Mobile Assist
supports the Siri Eyes Free Mode and Google App. (Google App can be used only with
the corresponding device.) Instructions can be spoken into the vehicle microphone
as if speaking a command to the phone...
The following procedures may be used to start the engine if the vehicle’s battery
is discharged. You can also call your Toyota dealer or a qualified repair shop.
Restarting the engine
If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt
battery, you can jump start your vehicle by following the steps below...
Categories
■ Trunk opener
Pull the lever upward to release the trunk lid.
![Toyota Corolla. Opening the trunk](images/books/2140/toyota_corolla__opening_the_trunk_215.png)
■ Trunk release button (vehicles with a smart key system)
While carrying the electronic key, press the button on the trunk lid.
When all the doors are unlocked using one of the following methods, the trunk
can be opened without the electronic key:
Entry function
Wireless remote control
Door lock switches
Automatic door unlocking system
Mechanical key
read more