Toyota Corolla Manuals

Toyota Corolla: RCTA (Rear Cross Traffic Alert) function / Turning the RCTA function on/off

Use the meter control switches to enable/disable the RCTA function.

1 Press Toyota Corolla. Turning the RCTA function on/off or Toyota Corolla. Turning the RCTA function on/off to select Toyota Corolla. Turning the RCTA function on/off.

2 Press Toyota Corolla. Turning the RCTA function on/off or Toyota Corolla. Turning the RCTA function on/off to select “RCTA” and then press .

When the RCTA function is disabled, the RCTA OFF indicator (®P.88) illuminates. (Each time the engine switch is turned off then changed to ON, the RCTA function will be enabled automatically.)

WARNING

■Cautions regarding the use of the function

The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings.

The RCTA function is only a supplementary function which alerts the driver that a vehicle is approaching from the right or left at the rear of the vehicle. As the RCTA function may not function correctly under certain conditions, the driver’s own visual confirmation of safety is necessary. Over reliance on this function may lead to an accident resulting death or serious injury.

■Outside rear view mirror indicator visibility

In strong sunlight, the outside rear view mirror indicator may be difficult to see.

■Hearing the RCTA buzzer

The RCTA buzzer may be difficult to hear over loud noises, such as if the audio system volume is high.

■When “Rear Cross Traffic Alert Unavailable” is shown on the multi-information display

Water, snow, mud, etc., may be attached to the rear bumper around the sensors. (®P.255) Removing the water, snow, mud, etc., from the attached to the rear bumper around the sensors to normal.

Additionally, the function may not function normally when used in extremely hot or cold environments.

    RCTA (Rear Cross Traffic Alert) function

    The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up...

    RCTA function

    ■ Operation of the RCTA function The RCTA function uses rear side radar sensors to detect vehicles approaching from the right or left at the rear of the vehicle and alerts the driver of the presence of such vehicles by flashing the outside rear view mirror indicators and sounding a buzzer...

    Other information:

    Toyota Corolla 2019-2022 Owners Manual: Using the interior lights. Interior lights list


    Location of the interior lights A - Rear interior light B - Door trim lights C - Front interior/personal lights D - Center tray light E - Cup holder lights Operating the interior lights ■ Front 1 Turns the door position on/off When a door is opened while the door position is on, the lights turn on...

    Toyota Corolla 2019-2022 Owners Manual: Setting automatic contact/ history transfer


    The automatic contact/history function is available for PBAP compatible Bluetooth® phones only. 1 Select “Automatic Transfer”. 2 Select the desired item to be set. A - Select to set automatic contact/ history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred...

    Categories

    Gauges and meters (4.2-inch display)

    Meter display

    ■ Locations of gauges and meters

    Toyota Corolla. Gauges and meters (4.2-inch display)

    The units of measure may differ depending on the intended destination of the vehicle.

    A - Tachometer Displays the engine speed in revolutions per minute

    read more

    Copyright © 2022 www.tocorolla12.com