Toyota Corolla: Seat belts / Adjusting the seat belt shoulder anchor height (front seats)

1 Push the seat belt shoulder anchor down while pressing the release button A.
2 Push the seat belt shoulder anchor up while pressing the release button A.
Move the height adjuster up and down as needed until you hear a click.
WARNING
■Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your
shoulder. The belt should be kept away from your neck, but not falling off your
shoulder. Failure to do so could reduce the amount of protection in an accident
and cause death or serious injuries in the event of a sudden stop, sudden swerve
or accident.
1 To fasten the seat belt, push the plate into the buckle until a click sound
is heard.
2 To release the seat belt, press the release button A.
■Emergency locking retractor (ELR)
The retractor will lock the belt during a sudden stop or on impact...
The pretensioners help the seat belts to quickly restrain the occupants by retracting
the seat belts when the vehicle is subjected to certain types of severe frontal
or side collision or a vehicle rollover...
Other information:
Listed below are the general maintenance items that should be performed at the
intervals specified in the “Owner’s Warranty Information Booklet” or “Owner’s Manual
Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you
notice should be brought to the attention of your Toyota dealer or qualified service
shop for advice...
If a tow truck is not available in an emergency, your vehicle may be temporarily
towed using cables or chains secured to the emergency towing eyelets. This should
only be attempted on hard surfaced roads for at most 50 miles (80 km) at under 18
mph (30 km/h)...