Toyota Corolla: Dynamic radar cruise control with full-speed range / Changing the vehicle- to-vehicle distance (vehicle-to-vehicle distance control mode)

Adjusting the set speed

To change the set speed, press the “+RES” or “-SET” switch until the desired set speed is displayed. 1 Increases the speed (Except when the vehicle has been stopped by system control in vehicle-to-vehicle distance control mode) 2 Decreases the speed Fine adjustment: Press the switch...

Vehicle-to-vehicle distance settings (vehicle- to-vehicle distance control mode)

Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance increases/decreases in accordance with vehicle speed...

Other information:

Toyota Corolla 2019-2026 Owners Manual: Turning the RCTA function on/off

Use the meter control switches to enable/disable the RCTA function. 1 Press or to select . 2 Press or to select “RCTA” and then press . When the RCTA function is disabled, the RCTA OFF indicator (®P.88) illuminates. (Each time the engine switch is turned off then changed to ON, the RCTA function will be enabled automatically...

Toyota Corolla 2019-2026 Owners Manual: Rear view monitor system

Audio The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen...